Turbo - 2-cutting-edge, Single-sided Inserts
Version 06: APMX = 5,0 mm / DC = 10 - 40 mm - Version 10: APMX = 9 mm / DC = 16 - 100 mm - Version 12: APMX = 11 mm / DC = 20 - 250 mm - Version 16: APMX = 15 mm / DC = 25 - 250 mm - Version 18: APMX = 17 mm / DC = 32 - 250 mmThe Turbo family takes square shoulder milling to the max. Suitable for most roughing, semi-finishing and finishing operations, these highly versatile cutters offer long tool life and high precision via optimized properties that reduce heat generation and cutting forces.
The tools feature a coated, pre-hardened cutter body with two different pitch configurations for meeting tight tolerances and providing high reliability in a broad range of workpiece materials. Not only does this coated/hardened surface protect the tool from wear, it also prevents chips from welding on the cutter body.
Turbo cutters have precision milled pocket seats that improve run-out, stability and tool life by providing optimal contact between the tool body and insert. Integrated through-coolant channels support high productivity and promote excellent chip evacuation.
The comprehensive range of inserts, carbide grades and corner radii available for use with Turbo cutters further increase their adaptability, accuracy and reliability. Inserts can be set to a true 90-degree cutting angle to create clean 90-degree walls and eliminate secondary operations. Inserts lock into place via a strong center screw placed in the same direction as cutting forces, and wiper flats optimize surface finishes. Such versatility also makes it possible for Turbo cutters to excel in slotting, ramping, facing, pocketing, plunging and turn milling operations.
Mounting types for the Turbo family include Cylindrical, Weldon, Arbor and Combimaster™.