Reduce tool-change and indexing time in your swiss machining operations

Insert indexing and chips can bring your high-volume, small-part turning operations on Swiss-style machines to an immediate halt. Constrictive work spaces and multiple tools situated in extremely close proximity to one another make insert indexing difficult, time consuming and inefficient. At the same time, poor chip evacuation leads to reduced tool life for toolholders and cutting inserts.

When insert indexing and chip evacuation is a problem

Insert indexing and chips can bring your high-volume, small-part turning operations on Swiss-style machines to an immediate halt. Constrictive work spaces and multiple tools situated in extremely close proximity to one another make insert indexing difficult, time consuming and inefficient. At the same time, poor chip evacuation leads to reduced tool life for toolholders and cutting inserts.

Eliminate inefficient indexing

Tight machine work spaces make accessing and removing screws very difficult. Because of its modular design, the Modular QC Toolholder eliminates the difficulty of indexing small inserts as the system allows you to change the insert outside the machine which reduces the risk of very small screws and inserts dropping down into the machine.

Keep chips from stopping your production

Chips can hinder unmanned small-part operations on Swiss-style machines and continuously cause production stoppages. Efficiently evacuate chips with Seco Jetstream Tooling® and Seco Jetstream Tooling® Duo technologies incorporated into the Seco Modular QC Toolholder.

Your challenges:

Erratic chip behaviour hinders your unmanned small-part machining operations and causes production stoppages
Tight spacing between tools and limited access in your Swiss-style machine make insert indexing difficult and time consuming. Assembling coolant hoses proves cumbersome in the limited space

Your benefits:

Repeatability due to tight tolerances on the interface
Secure single lock system makes it easy to use
Predictability tool life with Seco Jetstream Tooling®
Multiple heads fit on a single shank offering versatility
Precision insert positioning due to patented carbide pin pocket design
Productivity increased due to less machine down time between tool changes

The Seco Solutions:

For maximum tool life and highly efficient chip control, Seco Jetstream Tooling® and Seco Jetstream Tooling® Duo technologies built into the Modular QC Toolholder offer direct coolant precisely to the cutting zone
With the Modular QC Toolholder, you can quickly remove both cutting head and insert as one assembly for fast and easy indexing outside of the machine

Range Overview

SHANKS

Metric size 1010 mm, 1212 mm & 1616 mm
Inch size 0.375", 0.50" & 0.625"

CUTTING HEADS FOR

ISO turning (CC06, CC09, DC07, DC11, VB11)
Threading (16ER & 16EL)
Grooving (LC1902)
Parting-off (150.10 blade size 15)

INSERTS

TS2050 and CP500 grades with F1, MF2, and AL chipbreaker

Related content

Seco News 2020.1 B_08088_cover.tif

JETI ISO Toolholder range extension JETI Environmental.tif

SECO-CAPTO TOOLHOLDERS & CASSETTES FOR ADVANCED MATERIAL Capto Cassette Environmental 02.tif

Seco X2 System for Small Part Machining

Machining Navigator / Catalog Turning Turning_catalog_cover 2024-1.jpg

Seco QC modular toolholder simplifies swiss-style machining Small Parts Envirnmental.tif

Video: Modular Quick Change Swiss Machining Toolholder In Action Small Parts Envirnmental.tif

Video: Swiss Turning Production Made Easy With the Modular QC Toolholder Small Parts Envirnmental.tif

Video: Product Introduction of Modular Quick Change Swiss Machining Toolholder Small Parts Envirnmental.tif

Video: MODULAR QUICK-CHANGE (QC) TOOLHOLDER FOR SMALL PART MACHINING Small Parts Envirnmental.tif

XP08 ALUMINIUM ROUTER XP08 Environmental.tif

RANGE EXTENSION OF SHELL MILL HOLDERS, SMALL FACE & SIDE LOCK HOLDERS IMPROVEMENTS SMH Environmental.tif

COMBIMASTER™ M20 Combimaster Summary.tif

EASYSHRINK EVO Easyshrink Environmental 1.tif

UNIVERSAL DRILLS 8XD AND 12XD Universal Drills Environmental.tif

SECO ROUND 10 AND 16 COPY MILLING INSERTS Round Cutters 10 16 Environmental.tif

DOUBLE TURBO 16

Machining Navigator / Catalog Tooling Systems Tooling System_catalog_cover 2024-1.jpg

Machining Navigator / Catalog Holemaking Holemaking_catalog_cover 2024-1.jpg

Machining Navigator / Catalog Solid End Mills Solid End Mill_catalog_cover 2024-1.jpg

Machining Navigator / Product Catalog Milling Milling_catalog_cover 2024-1.jpg

Seco News Summary 2020.1 SNS19.2_Cover_Summary

Seco Nanojet Reamers: reliable precision

Optimize Multi-Task Machining Coolant And Results

Seco X-Tra Long Solid Carbide Drills – 40xD-60xD x-tra long drill_landscape.jpg

Seco CH1050/CH2581 PCBN Hard Part Turning Inserts PCBN_CH grades_landscape.jpg

JS720 Solid End Mills addition JS720 range.png

Seco Digital Tool Assembly: quick, accurate data DTA2.tif

Easy setup with Seco Digital Axial Boring Heads Digital Axibore 2-20 and digital display .tif

JH730 Solid End Mills addition 20175142_JH730_Product_Background.tif

Square T4-12 Upgrades

Universal Drills Universal Drills Environmental.tif

MF2 Chipbreaker on Round RCMT/RCGT Inserts

TURBO 16 SQUARE SHOULDER MILLING CUTTERS Turbo_16_panorama_3.tif

Seco T35 Taps: match Tooling to Materials

335.14 Disc Milling Cutter extension 335.14 - Repleaceable head disc cutters DC 6.7-50mm.jpg

Seco Octomill™ 06: Flexible, Robust Tooling

Seco My Design: Design custom tools My Design at desk.jpg

Seco Component Guidance: the right tool, right away Component Guidence-in production.jpg

Versatile Round 20 Inserts Increase Tool Life Round 20 - Cutter and insert.jpg

Seco T30 Taps: a versatile universal geometry

Seco Stabilizer Series: Unmatched Metal Removal Stabilizer tip.jpg

Seco 335.98 Disc Milling Cutter system 335.98 - Fixed pockets - XN inserts.jpg

Seco X-Head Exchangeable End Mill System XHeads Group.tif

Seco Helical LN4-11 Milling Cutter LN4-11 cutter body range 2.jpg

Seco Machine Library Machine Library 2.jpg

Guillaume Bourderon appointed Sales Unit Market Manager France

JETI CONVERSION GROOVING AND PARTING-OFF

JETI Toolholder for RCMT/RCGT Turning Inserts JETI round inserts coolant machining 2.jpg

Seco S43/S45/S46 Solid End Mills for Aluminum S450 range.jpg

Turbo 12 & 18 Chip Splitter Inserts Turbo 12-18 cutter body range assortment.jpg

Seco C-Series General Purpose End Mills C-Series range 2.jpg

Steadyline® ø25mm (1”) series HQ_IMG_Steadyline25_GL_Heads_Turning_20186133.tif

New MP Milling Grades BIG-PLUS_BT JIS.tif

Unleash your drilling potential Universal Drills Environmental.tif

JETI conversion Grooving and Parting-off Capto Seco Capto Jetstream Tooling Group Image.tif

JM100 MINI END MILLS JM100

High Feed square cut size 14 insert High Feed SP14 Contouring High Speed.tif

ISO K THREADING TAPS Threading Group Image.tif

R220.88 WITH SNMU INSERTS SNMU Inserts Campaign

TTP2050 HQ_IMG_TTP2050_20186131.tif

DOUBLE QUATTROMILL™ 14 HQ_IMG_Group_Photo_TTM_2019.tif

DOUBLE OCTOMILL™ HQ_Double_Octomill_Group_Photo_TTM_2019 .tif

DOUBLE QUATTROMILL™ 22 B_08104.tif